# Floor Coatings

Source: https://leadercoat.com/product-categories/floor-coatings/

Language: en

Published: 2026-11-08T08:47:39.196Z

Updated: 2026-11-09T08:10:59.433Z

Choose a decorative floor finish around the substrate and the way the space is used. Start with a sound, dry base, decide the colour and surface appearance, and plan the primer, coating and curing stages together.

![Grey coloured-quartz coating being poured from a pail onto a floor](https://leadercoat.com/media/p40-pour.webp)

## Start with the base and the service conditions

Source: https://leadercoat.com/product-categories/floor-coatings/#selection

**Concrete and cement.** Check surface strength, flatness, cracks and moisture. Prepare and repair the base and select a compatible primer.

**Tile and marble.** Inspect the existing finish, clean thoroughly and check adhesion on a representative area. Confirm whether the surface needs primer.

**Traffic and exposure.** Describe pedestrian use, cleaning, wet areas, loads and indoor or outdoor exposure. A glossy appearance alone does not establish a slip or service rating.

## Floor coatings in this range

Source: https://leadercoat.com/product-categories/floor-coatings/#direct-products

- [Self-Leveling Epoxy Quartz Floor Coating](https://leadercoat.com/products/self-leveling-epoxy-quartz-floor-coating/) — Create a decorative coloured-quartz finish on a prepared floor. This two-component, water-based epoxy coating is mixed with its matched hardener, poured and spread with a squeegee. Choose the colour and pack size around the substrate, appearance and area you need to coat.
- [Water-Based 3-in-1 Epoxy Floor Coating](https://leadercoat.com/products/water-based-3-in-1-epoxy-floor-coating/) — Refresh a prepared concrete or cement floor with a smooth, glossy colour finish. The water-based coating is supplied ready to apply by brush or roller. Use two coats of the same product for the standard system on a suitable base.

## Think in substrate, primer and finish layers

Source: https://leadercoat.com/product-categories/floor-coatings/#layers

| Property | Detail |
| --- | --- |
| Substrate | The existing concrete, cement, tile or marble provides the base. Repair and moisture checks come first. |
| Primer | A compatible primer seals or prepares the base where required. Its consumption is separate from that of the floor finish. |
| Decorative coating | The epoxy binder and coloured aggregate form the finish. Select the colour, application amount and protection period for the project. |

## Plan quantity and the work sequence

Source: https://leadercoat.com/product-categories/floor-coatings/#planning

The current coloured-quartz coating has a reference consumption of about 1.3 kg/m² and listed packs from 1 to 50 kg. Allow for surface roughness, preparation and practical losses when discussing quantity; the reference does not specify a guaranteed film thickness.

Prepare tools and working areas before mixing. Apply the mixed coating within 20 minutes. Plan pedestrian access around the 12–16 hour reference waiting time and keep the new floor dry for 7 days. Confirm actual application and cure conditions for the supplied material.

## Choose an appearance for the space

Source: https://leadercoat.com/product-categories/floor-coatings/#appearance

Colour references show shops, cafés, gyms, exercise studios, kitchens, bathrooms and residential interiors. Use them to discuss appearance, then test the selected coating on the actual substrate. For wet, outdoor or heavily loaded locations, agree the required performance and preparation before ordering.

![Sea Gray decorative quartz floor shown in a home library](https://leadercoat.com/media/p40-sea-gray.webp)

## Samples and project details

Source: https://leadercoat.com/product-categories/floor-coatings/#samples

Compare the [self-leveling epoxy quartz floor coating](https://leadercoat.com/products/self-leveling-epoxy-quartz-floor-coating/) for detailed preparation, mixing, colours and troubleshooting. For a quotation, include the floor area, substrate condition, colour, application method and destination. Samples are free with customer-paid freight; order quantity and packaging are confirmed with sales.

## Floor-coating questions

Source: https://leadercoat.com/product-categories/floor-coatings/#questions

### Can I coat directly over an existing floor?

Assess the existing material, adhesion, cleanliness, moisture and flatness first. Repair unstable areas and complete an adhesion trial; the preparation and primer depend on the substrate.

### Is primer coverage the same as coating consumption?

No. The approximately 1.3 kg/m² figure belongs to the coloured-quartz coating. The separate primer illustration gives approximately 8 m²/kg. Calculate and confirm each layer separately.

### Which information helps select a floor coating?

Provide the substrate and photographs, area, preferred colour, traffic, cleaning and moisture exposure. Include any required wet-slip, fire or chemical-resistance specification and the delivery country.

## Plan your floor-coating project

Send the area, substrate, current floor condition, colour, traffic and location. We can discuss a sample, coating quantities, compatible preparation and supply.

[Inquiry & samples](https://leadercoat.com/product-categories/floor-coatings/#inquiry)