# Water-Based 3-in-1 Epoxy Floor Coating

Source: https://leadercoat.com/products/water-based-3-in-1-epoxy-floor-coating/

Language: en

Published: 2026-11-09T08:10:59.433Z

Updated: 2026-11-09T08:10:59.433Z

Refresh a prepared concrete or cement floor with a smooth, glossy colour finish. The water-based coating is supplied ready to apply by brush or roller. Use two coats of the same product for the standard system on a suitable base.

![White pail labelled 3-in-1 water-based floor coating](https://leadercoat.com/_emdash/api/media/file/media/p41-main.webp)

## Where to use the coating

Source: https://leadercoat.com/products/water-based-3-in-1-epoxy-floor-coating/#overview

![Applicator rolling a yellow floor coating in a large interior](https://leadercoat.com/_emdash/api/media/file/media/p41-application.webp)

The 3-in-1 system combines the functions of a primer, colour coat and clear finish in the same coating. On suitable prepared floors, the supplier illustrates two coats of the same product without a separate primer or clear coat. Test adhesion first if the base is porous, polished or previously coated.

Consider this coating for sound concrete and cement floors in garages, workshops, storage areas and commercial interiors. Match the system to actual traffic, cleaning, moisture and exposure. Confirm suitability for outdoor, wet, sport or other specified floors before ordering.

## Product specifications

Source: https://leadercoat.com/products/water-based-3-in-1-epoxy-floor-coating/#specifications

| Property | Detail |
| --- | --- |
| Reference model | JT0001. |
| Material | Ready-to-use water-based epoxy floor coating. |
| Appearance | Smooth gloss finish in solid colours. |
| Application | Brush or roller. Two coats in the standard system. |
| Substrate | Prepared concrete or cement. Assess existing finishes before coating. |
| Pack sizes | 1, 2, 5, 10, 20, 25 and 50 kg. |

## Prepare and apply two coats

Source: https://leadercoat.com/products/water-based-3-in-1-epoxy-floor-coating/#application

1. **Prepare the floor**

   Remove dust, grease, loose coatings and contamination. Repair surface defects, assess moisture and confirm the base is sound, clean and dry.

2. **Check a test area**

   Use a small representative area to verify adhesion and appearance. Confirm any preparation or priming required for porous, polished or previously coated floors.

3. **Brush or roll the first coat**

   Apply the coating as supplied, without thinning. Work in even passes and use a brush at edges where needed.

4. **Apply the second coat and protect the floor**

   Wait for the first coat to reach the recommended recoat condition. Apply the second coat evenly. Keep traffic and cleaning off the area until the floor is ready for its intended use.

Confirm the recoat interval and time to service for the supplied material and actual site conditions. Temperature, humidity and airflow affect drying.

## Estimate material for both coats

Source: https://leadercoat.com/products/water-based-3-in-1-epoxy-floor-coating/#quantity

Estimate material for both coats. Send the floor area, substrate and condition, including any existing coating. Confirm the consumption per coat on a test area before ordering. Porous or rough floors can increase the amount required.

## Choose a solid colour

Source: https://leadercoat.com/products/water-based-3-in-1-epoxy-floor-coating/#colours

Compare the solid colour references below. Room lighting, screen settings and the substrate can change the appearance. Request a physical colour sample and confirm availability before ordering. Use material from the same batch for continuous areas where possible.

![Twenty colour references for the 3-in-1 epoxy floor coating, shown on floors](https://leadercoat.com/_emdash/api/media/file/media/p41-palette.webp)

## Colour and application gallery

Source: https://leadercoat.com/products/water-based-3-in-1-epoxy-floor-coating/#product-images

![Applicator using a roller on a glossy green floor](https://leadercoat.com/_emdash/api/media/file/media/p41-roller.webp)

Applicator using a roller on a glossy green floor

![white floor finish in a dining area](https://leadercoat.com/_emdash/api/media/file/media/p41-white.webp)

White

![medium gray floor finish in a parking garage](https://leadercoat.com/_emdash/api/media/file/media/p41-medium-gray.webp)

Medium Gray

![sky gray-blue floor finish in a colourful corridor](https://leadercoat.com/_emdash/api/media/file/media/p41-sky-gray-blue.webp)

Sky Gray-Blue

![dark gray floor finish in a meeting room](https://leadercoat.com/_emdash/api/media/file/media/p41-dark-gray.webp)

Dark Gray

![azure sea floor finish in a workshop](https://leadercoat.com/_emdash/api/media/file/media/p41-azure-sea.webp)

Azure Sea

![light green floor finish in a warehouse aisle](https://leadercoat.com/_emdash/api/media/file/media/p41-light-green.webp)

Light Green

![light gray floor finish in an office](https://leadercoat.com/_emdash/api/media/file/media/p41-light-gray.webp)

Light Gray

![dark green floor finish in a workshop aisle](https://leadercoat.com/_emdash/api/media/file/media/p41-dark-green.webp)

Dark Green

![off-white floor finish in a warehouse](https://leadercoat.com/_emdash/api/media/file/media/p41-off-white.webp)

Off-White

![standard green floor finish in a marked parking lane](https://leadercoat.com/_emdash/api/media/file/media/p41-standard-green.webp)

Standard Green

![orange floor finish in a bedroom](https://leadercoat.com/_emdash/api/media/file/media/p41-orange.webp)

Orange

![yellow floor finish in a bedroom](https://leadercoat.com/_emdash/api/media/file/media/p41-yellow.webp)

Yellow

![indigo blue floor finish in a bedroom](https://leadercoat.com/_emdash/api/media/file/media/p41-indigo-blue.webp)

Indigo Blue

![lake green floor finish in a corridor](https://leadercoat.com/_emdash/api/media/file/media/p41-lake-green.webp)

Lake Green

![lake blue floor finish in a corridor with stairs](https://leadercoat.com/_emdash/api/media/file/media/p41-lake-blue.webp)

Lake Blue

![red floor finish in an enclosed bay](https://leadercoat.com/_emdash/api/media/file/media/p41-red.webp)

Red

![pink floor finish in a bedroom](https://leadercoat.com/_emdash/api/media/file/media/p41-pink.webp)

Pink

![mediterranean blue floor finish in an exercise room](https://leadercoat.com/_emdash/api/media/file/media/p41-mediterranean-blue.webp)

Mediterranean Blue

## Test results for the submitted sample

Source: https://leadercoat.com/products/water-based-3-in-1-epoxy-floor-coating/#tested-sample

Supplier-commissioned report HGW20232164, dated 29 August 2023, records the following results for the submitted 3-in-1 water-based floor coating sample under GB/T 22374-2018. Use the report conditions when comparing results. Confirm the current documentation and requirements for your project.

| Property | Detail |
| --- | --- |
| Drying in the lab | Surface dry in 0.5 h and through dry in 3 h. Site recoat and traffic times depend on actual conditions. |
| Pencil scratch hardness | B, reported as the measured result. |
| Abrasion | 0.015 g mass loss at 750 g load and 500 cycles. |
| Impact | Passed the specified 1,000 g steel-ball test. |
| Water resistance | Passed the specified 168 h test. |
| Chemical exposure | Passed the specified 72 h tests with No. 120 petroleum solvent and 20% sodium hydroxide. Confirm other exposure conditions separately. |

## Application questions

Source: https://leadercoat.com/products/water-based-3-in-1-epoxy-floor-coating/#questions

### Does the standard system need a separate primer or clear coat?

The supplied two-coat system uses the same coating on a suitable prepared base. An adhesion test helps determine whether the actual floor needs additional preparation or a compatible primer.

### Can I apply it over existing paint?

Check that the old finish is sound and compatible. Remove loose areas and contaminants, then test adhesion on a small area before coating the full floor.

### How much material should I order?

Provide the area, substrate and its condition. Measure coverage for one coat on a representative test area, then estimate both coats and allow for surface profile and application losses.

### Can I specify it for forklift traffic or an ESD floor?

Provide wheel loads, traffic frequency, cleaning and any required electrical resistance or other performance criteria. Agree the applicable test evidence and system before specifying the coating.

## Packaging and samples

Source: https://leadercoat.com/products/water-based-3-in-1-epoxy-floor-coating/#supply

Pack references are 1, 2, 5, 10, 20, 25 and 50 kg. Confirm the selected shade, net pack weight and current packaging. Samples are free, with freight paid by the customer. Ask sales about quantity, OEM packaging and lead time.

## Discuss your floor or request a sample

Send the floor area, base condition, selected colour, expected traffic and delivery country. Include photos or any project test requirements.

[Inquiry & samples](https://leadercoat.com/products/water-based-3-in-1-epoxy-floor-coating/#inquiry)