Product range
Choose a decorative floor finish around the substrate and the way the space is used. Start with a sound, dry base, decide the colour and surface appearance, and plan the primer, coating and curing stages together.
Browse the range
Concrete and cement. Check surface strength, flatness, cracks and moisture. Prepare and repair the base and select a compatible primer.
Tile and marble. Inspect the existing finish, clean thoroughly and check adhesion on a representative area. Confirm whether the surface needs primer.
Traffic and exposure. Describe pedestrian use, cleaning, wet areas, loads and indoor or outdoor exposure. A glossy appearance alone does not establish a slip or service rating.
Create a decorative coloured-quartz finish on a prepared floor. This two-component, water-based epoxy coating is mixed with its matched hardener, poured and spread with a squeegee. Choose the colour and pack size around the substrate, appearance and area you need to coat.
View product
Refresh a prepared concrete or cement floor with a smooth, glossy colour finish. The water-based coating is supplied ready to apply by brush or roller. Use two coats of the same product for the standard system on a suitable base.
View productThe current coloured-quartz coating has a reference consumption of about 1.3 kg/m² and listed packs from 1 to 50 kg. Allow for surface roughness, preparation and practical losses when discussing quantity; the reference does not specify a guaranteed film thickness.
Prepare tools and working areas before mixing. Apply the mixed coating within 20 minutes. Plan pedestrian access around the 12–16 hour reference waiting time and keep the new floor dry for 7 days. Confirm actual application and cure conditions for the supplied material.
Colour references show shops, cafés, gyms, exercise studios, kitchens, bathrooms and residential interiors. Use them to discuss appearance, then test the selected coating on the actual substrate. For wet, outdoor or heavily loaded locations, agree the required performance and preparation before ordering.
Compare the self-leveling epoxy quartz floor coating for detailed preparation, mixing, colours and troubleshooting. For a quotation, include the floor area, substrate condition, colour, application method and destination. Samples are free with customer-paid freight; order quantity and packaging are confirmed with sales.
Assess the existing material, adhesion, cleanliness, moisture and flatness first. Repair unstable areas and complete an adhesion trial; the preparation and primer depend on the substrate.
No. The approximately 1.3 kg/m² figure belongs to the coloured-quartz coating. The separate primer illustration gives approximately 8 m²/kg. Calculate and confirm each layer separately.
Provide the substrate and photographs, area, preferred colour, traffic, cleaning and moisture exposure. Include any required wet-slip, fire or chemical-resistance specification and the delivery country.
Send the area, substrate, current floor condition, colour, traffic and location. We can discuss a sample, coating quantities, compatible preparation and supply.