Coating range
Removable frosted and coloured finishes for compatible glass doors, windows and partitions. Assess privacy, light transmission and appearance on the actual glazing.
Browse the range
A removable coating that gives compatible glass a frosted or coloured appearance. It supports temporary privacy, decorative partition work and construction-period screening while retaining the option to remove the coating.
View productGlass treatment, lighting, viewing distance and film thickness influence the result. Compare the coating from both sides and evaluate removal before committing to the full area.
Product | Format | Selection Reference |
|---|---|---|
Water-based liquid | Two or three thin coats; 2–3 hours between coats; seven days full drying |
A removable frosted coating changes the appearance of glass without replacing the pane. It can suit temporary privacy, decorative areas and changes to an interior layout. Judge the effect on the actual glass, since thickness, tint, surface treatment and existing coatings can change the result. Compare the view from both sides with daylight and artificial light, including the direction in which privacy is most important.
The selected product uses two or three thin coats with approximately 2–3 hours between coats. Keep application even across the pane and treat natural boundaries consistently. Heavy local application can create uneven translucency, runs or a different surface appearance. Mask surrounding frames and any areas that should stay clear, and check the coated sample against the desired visual effect before treating multiple panes.
Protect the initial finish from moisture for at least the first 24 hours. The listed full-drying period is seven days, which is distinct from the earlier visual appearance of a dry coating. Allow for this interval in an installation schedule, especially where the glass is near water or will be cleaned soon after application. Confirm drying under the actual room temperature and ventilation.
Trial removal on the specific glass finish and check for residual film at frame edges. Provide glass type, pane dimensions, desired privacy, indoor conditions and the planned duration of use. Include whether the glass carries an existing applied film or treatment. The coating's 12-month shelf life makes stock rotation relevant for installers holding material across several projects.
Apply a sample to the actual glass and compare the view from both sides under daytime and indoor lighting. Appearance depends on the glazing, film build and viewing conditions.
Yes. Samples are free, with freight paid by the customer. Include your substrate and application requirements in the enquiry.
Tell us your surface, application process and quantity. Free samples are available with customer-paid freight.