450 ml furniture protective aerosol can
Peelable Furniture Protective Coatings
Clear Peelable Protective Spray Coating for Furniture and Tabletops
A transparent aerosol coating that forms a removable protective film on compatible furniture and tabletop finishes. The spray format suits smaller surfaces, shaped details and sample work.
- Format
- 450 ml aerosol
- Standard colour
- Transparent
- Custom colour options
- Black, white, grey, red, blue, green and yellow by order arrangement
Surfaces & applications
Finished wooden furniture, tabletops and selected decorative surfaces where preserving the underlying appearance is important.
Clear spray film for furniture and tabletops
The aerosol applies a removable layer over compatible furniture finishes and other prepared surfaces. The transparent, semi-matt version is suited to projects where the original decorative surface should remain visible. It is described for protection against moisture, dust and everyday surface contamination, with the actual colour and gloss effect checked on the finished item.
Application around edges and detailed shapes
Spraying allows access around contours and recessed details that may be awkward to cover with a sheet. Work with thin, even passes and avoid wet build-up at edges. The product is a solvent-based modified-alkyd aerosol, so existing lacquer, soft plastic and other sensitive surfaces need a concealed compatibility trial before the full piece is treated.
Appearance and decorative options
A transparent coating can still change gloss, deepen a colour or make an uneven substrate more visible. Compare treated and untreated areas under normal lighting. Beside the standard clear finish, black, white, grey, red, blue, green and yellow may be discussed for a custom supply arrangement. Agree the actual sample appearance before a colour-sensitive order.
Retail and workshop supply
The listed packing is 24 cans per carton, with carton dimensions of 41 × 27.8 × 20.5 cm and a stated gross weight of 300 g per can. The shelf life is three years. These details support carton planning; the transport arrangement for the aerosol product is confirmed with the destination and order.
Continue Your Selection
Technical reference
Product specifications
Use these details alongside your substrate, application method and service conditions.
Discuss your requirements| Property | Detail |
|---|---|
| Format | 450 ml aerosol |
| Resin / liquid type | Modified alkyd resin; solvent-based |
| Standard colour | Transparent |
| Finish | Semi-matt |
| Custom colour options | Black, white, grey, red, blue, green and yellow by order arrangement |
| Packing | 24 cans per carton |
| Carton dimensions | 41 × 27.8 × 20.5 cm |
| Listed gross weight | 300 g per can |
| Shelf life | 3 years |
| Removal | Peel off the dried film |
Application process
Protection through the complete cycle
- 01
Prepare and trial
Clean and dry the finish. Spray a concealed area and inspect for softening, colour change or adhesion problems.
- 02
Mask and ventilate
Protect nearby surfaces and use a well-ventilated application area.
- 03
Apply light passes
Shake the can and build a uniform layer without flooding corners.
- 04
Dry and inspect
Allow the coating to dry before handling. Check clarity, gloss and the peel-off behaviour on the actual finish.
- 05
Remove when required
Lift an edge carefully and peel without scraping or pulling a weak underlying coating.
Clean and dry the finished surface and test a concealed area. Apply light, even passes with adequate ventilation, then allow the coating to dry before use. Check gloss, colour and peel behaviour on the actual furniture finish. Follow the aerosol handling information on the supplied product.
A closer look
Product & application gallery
Product formats, surface details and application examples.
View all 7 images
From evaluation to supply
Start with a sample.
Free samples are available; freight is paid by the customer. Order quantities vary by product and packaging. Many bulk coatings start at approximately 50 kg; contact sales for a flexible starting quantity. The usual order lead time is 10–20 days after details are confirmed, with shipping time additional. Include OEM requirements in your enquiry.
Frequently asked questions
Will the coating look identical on every finish?
The visual result depends on the original colour, gloss and texture. Evaluate a coated sample under the intended lighting.
Can this be used on bare absorbent wood?
Unsealed wood can absorb a liquid coating and alter removal. Test the actual surface and discuss sealing requirements before use.
Is the selected version water-based?
No. This specification uses the solvent-based modified-alkyd version.
Does clear mean invisible?
A clear layer can still alter gloss and the depth of colour. The selected finish is semi-matt, so approve a sample on the actual furniture.
How is it packed?
The listed standard is a 450 ml can, 24 cans per carton, with a three-year shelf life.
Discuss this product
Include the furniture material, varnish or lacquer type, surface area, intended service conditions and quantity in cans or cartons.
- sales@leadercoat.com
- Phone & WhatsApp
- +86 151 7525 6533
- Sample support
- Free samples. Customer-paid freight.